¡¡

¡¡

Get Your Quotation

  Home:  Global Wood   Industry News & Markets

North American Lumber Market

16-30th November 2007


¡¡

US imports of wooden furniture exceeds USD27 billion
Researchers of the AKTRIN Furniture Information Center estimate the 2007 value of US imports of all furniture (North American Industry Classification System or NAICS 337) at USD27.24 billion. This is up by 154% from 1998. The largest foreign supplier is China, holding a market share of 55%. Its current annual value stands at USD14.89 billion, which is 565% higher than 10 years ago. A distant second place belongs to Canada with a share of 14%. In 1998, Canada was the largest foreign furniture supplier to the US. Mexico currently stands in third place. In 1998, Taiwan was in the third spot, but then fell in relative terms to the current seventh position and declined in absolute terms by more than 20%. The fourth most important foreign source of furniture for the US is Vietnam. It exported an estimated USD1.2 billion worth of furniture to the United States this year. A decade ago this value was only slightly above USD1 million. No other
country achieved the same steep growth rate of furniture exports as Vietnam.

For stakeholders in the wood and forestry industries, only wooden furniture is of interest. The share of imported furniture that contains at least some wood is about 70% however it may also contain non-wooden raw materials. The remaining 30% of US furniture imports are non-wood (metal, plastic, stone, glass, etc.) and consist mostly of metal office furniture.

The largest wooden furniture sub-category is Nonupholstered Wood Household Furniture (NAICS 337122). Its estimated import value as of 2007 is USD10.42 billion or 38% of overall US furniture imports. Currently, the top suppliers are China with USD4.81 million, Canada with USD1.14 billion, and Vietnam with USD1.07 billion. Together, these three countries supply more than twothirds of all foreign produced wood furniture in the US.

In 1998, the three top suppliers were Canada, followed by China and Taiwan. Taiwan¡¯s wooden furniture exports to the US declined by 76% between 1998 and 2007. However, many Taiwanese companies are now operating from mainland China and their exports are counted as Chinese exports. Vietnam was an insignificant supplier in 1998 (ranked number 25) with a value of less than USD1 million. In addition to China, Canada and Vietnam, other important exporters of wooden furniture to the US include Malaysia, Indonesia, Mexico, Italy, Thailand, Brazil and the Philippines, all with annual export values in excess of USD100 million each.

Another important furniture sub-category is Upholstered Household Furniture, (NAICS 337121). As of 2007, the US import value stood at an estimated USD3.28 million, or 12% of overall furniture imports. However, on average only about 40% of the material costs of upholstered furniture is wood, with the rest being fabrics, leather, springs, and foam. The top ranking foreign upholstery suppliers for the US are China with an estimated export value of USD2.21 million, Mexico with USD315 million, and Italy with USD172 million. Together, these three countries have a US market share of 82%. While Vietnam experienced a phenomenal growth rate during the past decade, it still remains a relatively minor supplier of upholstery for the US (USD91 million). Traditionally, Italy, Mexico and Canada have been the most important foreign upholstery suppliers to the US. However, they have all lost market share in the US, and Italy even suffered a decline in absolute terms between 1998 and 2007.

Wooden Office Furniture (NAICS 337211) is also of great relevance to wood suppliers. According to AKTRIN, US imports in 2007 are estimated at USD994 million, which is 3.6% of overall American furniture imports. Growth between 1998 and 2007 was 95%, which is much less than for most other furniture categories. The largest foreign suppliers ¨C today as well as back in 1998 ¨C are China, Canada, Taiwan and Mexico. The highest growth rates during the past decade have been achieved by Vietnam, China, Malaysia, Australia, Spain, and Switzerland.

US imports of Wood Kitchen Cabinets and Countertops (NAIC 337110) stand at approximately USD795 million or 2.9% of total furniture imports in the US in 2007. This is relatively small in relation to the large US consumption of kitchen cabinets. The reason is that external suppliers suffer a competitive disadvantage compared to local suppliers as kitchen cabinets generally require installation. Important foreign source countries are Canada, China, Italy, Mexico and Germany.

It is interesting to note that about 12% of American furniture imports are in the form of furniture parts. In value terms, this is more than USD3.5 billion annually. About 55% of all parts are for furniture, and the remaining 45% are parts for seats. However, only half of furniture parts are wooden products (including rattan, bamboo, cane, etc.), and in the case of seats, the wooden share is only in the 10% range. In other words, imports of wooden parts (for furniture and seats) amounted to an estimated value of USD1.2 billion in 2007. During the past decade, US imports of parts for furniture and seats, and in particular wooden furniture parts, grew slightly faster than imports of finished furniture and seats.

The largest foreign supplier of wooden furniture parts (excluding rattan, bamboo, cane, etc.) is China, with an estimated value of USD471 million as of 2007, followed by Canada, Mexico, Italy and Vietnam. The largest foreign suppliers of rattan parts are the Philippines, Indonesia, and China, and the largest suppliers of parts of bamboo, osier, cane, and similar products are China, the Philippines, and Indonesia (in addition to Canada acting indirectly as a reexporter).

Abbreviations

LM        Loyale Merchant, a grade of log parcel  Cu.m         Cubic Metre
QS         Qualite Superieure    Koku         0.278 Cu.m or 120BF
CI          Choix Industriel                                                       FFR            French Franc
CE         Choix Economique                                                        SQ              Sawmill Quality
CS         Choix Supplimentaire      SSQ            Select Sawmill Quality
FOB      Free-on-Board     FAS            Sawnwood Grade First and
KD        Kiln Dry                               Second 
AD        Air Dry        WBP           Water and Boil Proof
Boule    A Log Sawn Through and Through MR              Moisture Resistant
              the boards from one log are bundled                      pc         per piece      
              together                      ea                each      
BB/CC  Grade B faced and Grade C backed MBF           1000 Board Feet          
              Plywood   MDF           Medium Density Fibreboard
BF         Board Foot F.CFA         CFA Franc        
Sq.Ft     Square Foot               Price has moved up or down

Source: ITTO'  Tropical Timber Market Report

CopyRight(R) Global Wood Trade Network. All rights reserved

¡¡